Activity : Research on my project.
Objective :
- To get an idea how to construct the project.
- To find what other item need to use to build this project.
Method :
- Do some research on the internet.
- Do research on the library. Try to find similar project report.
Result : The objective of a photovoltaic-thermoelectric (PV-TE)
Solar Simulator is to provide a controllable indoor
test facility under laboratory conditions, used for the testing of solar cells
by using software. Hybrid photovoltaic/thermal (PV/T) solar systems can
simultaneously provide electricity and heat, achieving a higher conversion rate
of the absorbed solar radiation than standard PV modules. When properly
designed, PV/T systems can extract heat from PV modules, heating water or air
to reduce the operating temperature of the PV modules and keep the electrical
efficiency at a sufficient level. PV/T solar systems are a recently emerging
solar technology that allows for the simultaneous conversion of solar energy
into both electricity and heat. This type of technology present some
interesting advantages over the conventional “side-by-side” thermal
and PV solar systems, such as higher combined electrical/thermal energy outputs
per unit area, and a more uniform and aesthetical pleasant roof area. Despite
the fact that early research on PV/T systems can be traced back to the
seventies, only recently it has gained a renewed impetus.
Conclusion : After this research has been done, idea can get to do the project and achieve the objective for this project.
No comments:
Post a Comment